Electrical Specifications (Obtained using DEMOD-DVRT® and DVRT® with 800 Hz low pass filter at constant temperature)
||±0.2 to ±1% with polynomial calibration
||DEMOD output/sensor range
|Signal to noise
||standard - 1000 to 1with filter 3dB down at 800 Hz
||dependent upon displacement area
||800 Hz standard, 20 KHz optional
||offset 0.0039%/°C (typical)
span 0.016%/°C (typical)
dependent on target material
||±2 microns (typical)
||±2 µm (typical) at constant temperature
|diameter x length (thread)
4.83 mm x 19.0 mm (10-32 UNF-2A )
12.70 mm x 19.0 mm (½-20 UNF 2A)
||300 series stainless steel
||threaded stainless nuts
||45 cm, shielded, teflon insulated, stainless wire reinforced, multistrand conductors
||keyed 4-pin Lemo, polyolefin relief
|-55 to 175 °C
||0.036 “ to 0.070 “
Contact us for information on custom designs suitable for immersion, corrosive and high pressure environments.
There are no downloads for this product.
As an example. here is the Quick Start Guide for the M-DVRT-9: http://files.microstrain.com/Micro_Sub_DVRT_Quick_Start_Guide.pdf
Page 7 refers to the Slope and Offset that you will need to enter into the Smart Motherboard software.
In the Smart Motherboard software, click Tools.
Click Configuration and the Configuration screen appears.
Select the appropriate channel (remember that each channel, i.e., each DVRT and DEMOD –DVRT signal conditioner card in the Smart Motherboard is calibrated separately) by checking the Channel check box.
Select the Linear Radio Button.
Enter the Slope and Offset in the number scroll boxes.
Select None in the Peak Detect drop-down.
Change the Units from Volts to mm (for millimeters) by wiping through with your mouse.
Click Save As Default.
Click Return and you are ready to sample in millimeters.
Yes, as a courtesy, LORD MicroStrain® will provide an appropriate drill bit and tap to match the DVRT's thread size at a nominal charge.
In most cases, MicroStrain calibrates every DVRT with its accompanying electronics and provides a detailed calibration certificate. The certificate provides 3 methods of calibration and all the particulars including formulas to resolve voltage into engineering units.
- Standard Least Squares Linear Fit provides a simple mathematical method to convert sensor output to displacement and delivers reasonable accuracy.
- Polynomial Fit provides a more mathematically intensive method to convert sensor output to displacement and in turn delivers a high degree of accuracy. A possible drawback to some users of this method may be that it can not accurately report measurements beyond its stroke length (i.e., over-stroking).
- Multi-Segment Linear Fit provides the most mathematically intensive method to convert sensor output to displacement, delivers a high degree of accuracy and is not subject to the drawback of over-stroking.
- Body length to stroke ratios for DVRTs are typically 2.5 to 1 as compared to 6 to 1 for LVDTs.
- Microminiature DVRTs are available in body diameters of only 1.5 mm (.060") and with core diameters of only 0.5 mm (.020"); this makes them the World's smallest commercially available linear displacement transducers.
- DVRTs maintain their temperature stability due to the use of two coils arranged differentially.
- Each DVRT is capable of submersion as a standard feature.
- Each DVRT can be hermetically sealed as an option.
- Microminiature DVRTs are available with super-elastic, nickel titanium cores.
- DVRTs have a standard operating temperature range up to 175 degrees C; LVDTs typically only operate up to 85 degrees C.
- DVRTs have been operated successfully in liquid nitrogen; LVDTs typically only operate to -20 degrees C.
Not what you're looking for? Visit our FAQ page
or contact our Sales team
Please fill out the following form.
If you would like to speak to someone directly call 802-862-6629.