Product no longer stocked – limited availability
Contact for pricing and lead time--a minimum order quantity may apply
Product no longer stocked – limited availability
Contact for pricing and lead time--a minimum order quantity may apply
Product no longer stocked – limited availability
Contact for pricing and lead time--a minimum order quantity may apply
Product no longer stocked – limited availability
Contact for pricing and lead time--a minimum order quantity may apply

The SG-Link® -LXRS® is a small, low-power, two-channel analog input sensor node with many sampling options.

Product Highlights

  • One differential and one single-ended analog input channel and an internal temperature sensor
  • Ideal for remote and long term measurement of many Wheatstone bridge and analog-type sensors including: strain, force, torque, pressure, acceleration, vibration, magnetic field, displacement and geophones
  • Supports continuous, burst, and event-triggered sampling and datalogging to internal memory
  • User-programmable sample rates up to 4096 Hz
  • IP65/66 environmental enclosures available
Datasheet Manual Software
Where to Buy?
U.S. International OEM

The SG-Link®-OEM-LXRS® is a small, wireless, low-cost, extended range, two-channel analog input sensor node ready for OEM integration.  

Product Highlights

  • One differential and one single-ended analog input channel and an internal temperature sensor
  • Ideal for remote and long term measurement of many Wheatstone bridge and analog-type sensors including: strain, force, torque, pressure, acceleration, vibration, magnetic field, displacement and geophones
  • Supports continuous, burst, and event-triggered sampling and datalogging to internal memory
  • User-programmable sample rates up to 4096 Hz
  • Comprehensive SDK and OEM form factor for rapid integration
  • Simultaneously transmit real-time data and log to memory
Datasheet Software
Where to Buy?
U.S. International OEM

The V-Link® -LXRS® is a versatile seven channel analog wireless sensor node with high sample rates and datalogging capability.

Product Highlights

  • Four differential and three single-ended analog input channels and an internal temperature sensor
  • Ideal for remote and long term measurement of many Wheatstone bridge and analog-type sensors including: strain, force, torque, pressure, acceleration, vibration, magnetic field, displacement and geophones
  • Supports continuous, burst, and event-triggered sampling and datalogging to internal memory
  • l User-programmable sample rates up to 10 KHz
  • l IP65/66 environmental enclosures available
Datasheet Manual Software
Where to Buy?
U.S. International OEM

The IEPE-Link™ -LXRS® specialized high-speed node is designed for synchronized, periodic burst sampling of piezoelectric devices.

Product Highlights

  • Designed for high speed, high resolution periodic burst sampling of Integral Electronic Piezoelectric (IEPE) and Integrated Circuit Piezoelectric (ICP®) accelerometers
  • Ideal for vibration sensing in challenging applications, such as critical structure and machine health monitoring
  • High resolution data with 24-bit A/D converter
  • User-programmable 1 KHz to 104 KHz sample rates
  • 109.5 dB dynamic range
  • User-selectable low pass filtering
Datasheet Manual Software
Where to Buy?
U.S. International OEM

The SG-Link® -RGD -LXRS® ia a versatile, ruggedized four-channel analog sensor node with integrated triaxial accelerometer.

Product Highlights

  • Four analog input channels, integrated three-axis accelerometer, and an internal temperature sensor
  • Integrated strain sensor signal conditioning, embedded processing, and environmentally hardened form factor ideal for permanently mounting over strain gauges
  • Supports conventional bonded foil, piezoelectric-resistive, Wheatstone bridge, and modular Columbia Research
  • Labs-type strain gauges
  • Integrated triaxial accelerometer with MEMS technology and +/- 16 g range
  • User-programmable sample rates up to 4096 Hz
Datasheet Software
Where to Buy?
U.S. International OEM

Wireless Simplicity, Hardwired Reliability

High Performance

  • Scalable, long range wireless sensor networks up to 2 km
  • Lossless data throughput under most operating conditions

Ease of Use

  • Rapid deployment with wireless framework
  • Low power consumption allows extended use.
  • Remotely configure nodes, acquire and view sensor data with Node Commander®.
  • Optional web-based SensorCloud™ interface optimizes data storage, viewing, and analysis.
  • Easy integration via comprehensive SDK

Cost Effective

  • Out-of-the box wireless sensing solution reduces development and deployment time.
  • Volume discounts

Wireless Simplicity, Hardwired Reliability

High Performance

  • Scalable, long range wireless sensor networks up to 2 km
  • Lossless data throughput under most operating conditions

Ease of Use

  • Rapid deployment with wireless framework
  • Low power consumption allows extended use.
  • Wide range of sample rates and duty cycles
  • Optional web-based SensorCloud™ interface optimizes data storage, viewing, and analysis.

Cost Effective

  • Out-of-the box wireless sensing solution reduces development and deployment time.
  • Volume discounts

Wireless Simplicity, Hardwired Reliability

High Performance

  • Node-to-node synchronization up to ±32 microseconds
  • High resolution data with 16-bit A/D converter
  • Scalable, long range wireless sensor networks up to 2 km
  • Lossless data throughput under most operating conditions

Ease of Use

  • Rapid deployment with wireless framework
  • Event driven triggers for efficient monitoring
  • Remotely configure nodes, acquire and view sensor data with Node Commander®.
  • Optional web-based SensorCloud™ interface optimizes data storage, viewing, and analysis.
  • Easy integration via comprehensive SDK

Cost Effective

  • Reduction of costs associated with wiring
  • Low-cost per channel with 7 input channels per node

Wireless Simplicity, Hardwired Reliability™

High Performance

  • Node-to-node synchronization up to ±32 microseconds
  • Lossless data throughput under most operating conditions
  • Extended wireless communication range to 2km

Ease of Use

  • High capacity, rechargeable battery for extended use
  • Remotely configure nodes, acquire and view sensor data with Node Commander®.
  • Optional web-based SensorCloud™ interface optimizes data storage, viewing, and analysis.
  • Accepts most IEPE accelerometers

Cost Effective

  • Out-of-the box wireless sensing solution reduces development and deployment time.
  • Volume discounts

Wireless Simplicity, Hardwired Reliability

High Performance

  • Node-to-node synchronization up to ±32 microseconds
  • High resolution data with 16-bit A/D converter
  • Scalable, long range wireless sensor networks up to 2 km

Ease of Use

  • Flex bonding cable and node form factor allow quick installation over existing strain gauges
  • Low profile, environmentally sealed enclosure
  • On-board shunt calibration

Cost Effective

  • Reduction of costs associated with wiring
  • Out-of-the box wireless sensing solution reduces development and deployment time.

General

Sensor input channels

Differential analog, 1 channel

Single-ended analog, 1 channel

Integrated sensors

Internal temperature, 1 channel

Data storage capacity

2 M bytes (up to 1,000,000 data points, data type dependent)

Analog Input Channels

Measurement range

Differential: full-bridge, 350 Ω (factory configurable) Single-ended: 0 to 3 V dc

Accuracy

± 0.1% full scale typical

Resolution

12 bit

Anti-aliasing filter bandwidth

Single-pole Butterworth

-3 dB cutoff @ 250 Hz (factory configurable)

Bridge excitation voltage

+3 V dc, 50 mA total for all channels

(pulsed @ sample rates 16 Hz to conserve power)

Measurement gain and offset

User-selectable in software on differential channels gain values from 104 to 1800

Integrated Temperature Channel

Measurement range

-40 °C to 85 °C

Accuracy

± 2 °C (at 25 °C) typical

Resolution

12 bit

Sampling

Sampling modes

Synchronized, low duty cycle, datalogging

Sampling rates

Continuous sampling: 1 sample/hour to 512 Hz

Periodic burst sampling: 32 Hz to 4096 Hz

Datalogging: 32 Hz to 4096 Hz

Sample rate stability

± 3 ppm

Network capacity

Up to 2000 nodes per RF channel (and per gateway) depending on the number of active channels and sampling settings. Refer to the system bandwidth calculator: http://www.microstrain.com/configure-your-system

Synchronization between nodes

± 32 μsec

Operating Parameters

Radio frequency (RF)

transceiver carrier

2.405 to 2.470 GHz direct sequence spread spectrum over 14 channels, license free worldwide, radiated power programmable from 0 dBm (1 mW) to 16 dBm (39 mW); low power option available for use outside the U.S.- limited to 10dBm (10mW)

Range for bi-directional RF link

70 m to 2 km line of sight with RF power setting

RF communication protocol

IEEE 802.15.4

Power source

Internal: 3.7 V dc, 250 mAh lithium ion rechargeable battery

External: +3.2 to +9.0 V dc

Power consumption

See power profile :

http://files.microstrain.com/SG-Link-LXRS-Power-Profile.pdf

Operating temperature

-20 ˚C to + 60 ˚C (extended temperature range available with custom battery/enclosure, -40 ˚C to + 85 ˚C electronics only)

Acceleration limit

500 g standard (high g option available)

Physical Specifications

Dimensions

58 mm x 50 mm x 21 mm

Weight

42 grams

Environmental rating

Indoor use (IP65/66 enclosures available)

Enclosure material

ABS plastic

Integration

Compatible gateways

All WSDA® base stations and gateways

Compatible sensors

Bridge type analog sensors, 0 to 3 V dc analog sensors

Connectors

Screw terminal block

Shunt calibration

Internal shunt calibration resistor 499 KΩ, differential channel

Software

SensorCloud™, SensorConnect™, Node Commander®, Windows 7 (or newer)

Software development

Open-source MicroStrain Communications Library (MSCL) with sample code available in C++,Python,and.NET formats (OS and computing platform independent): http://lord-microstrain.github.io/MSCL/

Regulatory compliance

FCC (U.S.), IC (Canada), ROHS

General

Sensor input channels

Differential analog, 1 channel

Single-ended analog, 1 channel

Integrated sensors

Internal temperature, 1 channel

Data storage capacity

2 M bytes (up to 1,000,000 data points, data type dependent)

Analog Input Channels

Measurement range

Differential: full-bridge, 350 Ω (factory configurable) Single-ended: 0 to 3 V dc

Accuracy

± 0.1% full scale typical

Resolution

12 bit

Anti-aliasing filter bandwidth

Single-pole Butterworth

-3 dB cutoff @ 250 Hz (factory configurable)

Bridge excitation voltage

+3 V dc, 50 mA total for all channels

(pulsed @ sample rates 16 Hz to conserve power)

Measurement gain and offset

User-selectable in software on differential channels gain values from 104 to 2560

Integrated Temperature Channel

Measurement range

-40 °C to 85 °C

Accuracy

± 2 °C (at 25 °C) typical

Resolution

12 bit

Sampling

Sampling modes

Synchronized, low duty cycle, datalogging

Sampling rates

Continuous sampling: 1 sample/hour to 512 Hz

Periodic burst sampling: 32 Hz to 4096 Hz

Datalogging: 32 Hz to 4096 Hz

Sample rate stability

± 3 ppm

Network capacity

Up to 2000 nodes per RF channel (and per gateway) depending on the number of active channels and sampling settings. Refer to the system bandwidth calculator: http://www.microstrain.com/configure-your-system

Synchronization between nodes

± 32 μsec

Operating Parameters

Radio frequency (RF)

transceiver carrier

2.405 to 2.470 GHz direct sequence spread spectrum over 14 channels, license free worldwide, radiated power programmable from 0 dBm (1 mW) to 16 dBm (39 mW); low power option available for use outside the U.S.- limited to 10dBm (10mW)

Range for bi-directional RF link

70 m to 2 km line of sight with RF power setting

RF communication protocol

IEEE 802.15.4

Power source

External: +3.2 to +9.0 V dc (9 V dc alkaline battery provided)

Power consumption

See power profile : http://files.microstrain.com/SG-Link-OEM- LXRS-Power-Profile.pdf

Operating temperature

-40 ˚C to + 85 ˚C (excluding 9 V battery)

Acceleration limit

500 g standard (high g option available)

MTBF 1,300,000 hours (Telcordia method, SR332)

Physical Specifications

Dimensions

56 mm x 20 mm x 6 mm

Weight

7 grams

Integration

Compatible gateways

All WSDA® base stations and gateways

Compatible sensors

Bridge type analog sensors, 0 to 3 V dc analog sensors

Connectors

Solder pads or screw terminal connector

Shunt calibration

Internal shunt calibration resistor 499 KΩ, differential channel

Software

SensorCloud™, SensorConnect™, Node Commander®, Windows 7 (or newer)

Software development

Open-source MicroStrain Communications Library (MSCL) with sample code available in C++,Python,and.NET formats (OS and computing platform independent): http://lord-microstrain.github.io/MSCL/

Regulatory compliance

FCC (U.S.), IC (Canada), ROHS

 

General
 

Sensor input channels

Differential analog, 4 channels

Single-ended analog, 3 channels

Integrated sensors

Internal temperature, 1 channel

Data storage capacity

4 M bytes (up to 2,000,000 data points, data type dependent)

Analog Input Channels

Measurement range

Differential: full-bridge, 350 Ω (factory configurable) Single-ended: 0 to 3 V dc

Accuracy

± 0.1% full scale typical

Resolution

16 bit

Anti-aliasing filter bandwidth

Single-pole Butterworth

-3 dB cutoff @ 250 Hz (factory configurable)

Bridge excitation voltage

+3 V dc, 50 mA total for all channels

(pulsed @ sample rates 16 Hz to conserve power)

Measurement gain and offset

User-selectable in software on differential channels gain values from 21 to 13074

Integrated Temperature Channel

Measurement range

-40 °C to 85 °C

Accuracy

± 2 °C (at 25 °C) typical

Resolution

16 bit

Sampling

Sampling modes

Synchronized, low duty cycle, datalogging, event-triggered

Sampling rates

Continuous sampling: 1 sample/hour to 512 Hz Periodic burst sampling: 32 Hz to 10 KHz Datalogging: 32 Hz to 10 KHz

Sample rate stability

± 3 ppm

Network capacity

Up to 2000 nodes per RF channel (and per gateway) depending on the number of active channels and sampling settings. Refer to the system bandwidth calculator: http://www.microstrain.com/configure-your-system

Synchronization between nodes

± 32 μsec

Operating Parameters

Radio frequency (RF)

transceiver carrier

2.405 to 2.470 GHz direct sequence spread spectrum over 14 channels, license free worldwide, radiated power programmable from 0 dBm (1 mW) to 16 dBm (39 mW); low power option available for use outside the U.S.- limited to 10dBm (10mW)

Range for bi-directional RF link

Outdoor/line-of-sight: 2 km (ideal) *, 800 m (typical)**

Indoor/obstructions: 50 m (typical)**

RF communication protocol

IEEE 802.15.4

Power source

Internal: 3.7 V dc, 650 mAh lithium ion rechargeable battery

External: +3.2 to +9.0 V dc

Power consumption

See power profile :

http://files.microstrain.com/V-Link-LXRS-Power-Profile.pdf

Operating temperature

-20 ˚C to + 60 ˚C (extended temperature range available with custom battery/enclosure, -40 ˚C to + 85 ˚C electronics only)

Acceleration limit

500 g standard (high g option available)

Physical Specifications

Dimensions

74 mm x 79 mm x 21 mm

Weight

141 grams

Environmental rating

Indoor use (IP65/66 enclosures available)

Enclosure material

Anodized aluminum

Integration

Compatible gateways

All WSDA® base stations and gateways

Compatible sensors

Bridge type analog sensors, 0 to 3 V dc analog sensors

Connectors

Screw terminal block

Shunt calibration

Internal shunt calibration resistor 499 KΩ, differential channels

Software

SensorCloud™, Node Commander®, Windows XP/Vista/7

Software development

Open-source MicroStrain Communications Library (MSCL) with sample code available in C++,Python,and.NET formats (OS and computing platform independent): http://lord-microstrain.github.io/MSCL/

Regulatory compliance

FCC (U.S.), IC (Canada), CE, ROHS

*Measured with antennas elevated, no obstructions, and no RF interferers.

**Actual range varies depending on conditions such as obstructions, RF interference, antenna height, & antenna orientation.

 

 

 

 

 

 

 

General

Sensor input channels

IEPE accelerometer, 1 channel

Resolution

24-bit resolution

Dynamic range

109.5 dB dynamic range

Anti-aliasing filter bandwidth

5th order low-pass Butterworth filter with programmable cutoff frequencies from 26 Hz to 33 KHz

Digital finite impulse response

(FIR) filter

100 dB in frequency band from 1/2 to 8 times the sample rate

IEPE Accelerometer Requirements

Excitation voltage

23 V dc

Excitation current

2.3 mA

Output voltage

± 5 V dc

Sampling

Sampling modes

Synchronized (periodic burst sampling only)

Sampling rates

Periodic burst sampling: 1 kHz to 104 kHz

Maximum burst periods

150 seconds @ 1 kHz; 3 seconds @ 50 kHz; 1.3 seconds @

104 kHz

Measurable signal bandwidth

1 Hz to 33 kHz

Sample rate stability

± 3 ppm

Network capacity

Up to 125 nodes per RF channel (and per gateway) depending on the number of active channels and sampling settings. Refer to the system bandwidth calculator: http://www.microstrain.com/configure-your-system

Synchronization between nodes

± 32 μsec with 10 sec beacon interval (synchronized mode)

Operating Parameters

Radio frequency (RF)

transceiver carrier

2.405 to 2.470 GHz direct sequence spread spectrum over 14 channels, license-free worldwide, radiated power programmable from 0 dBm (1 mW) to 16 dBm (39 mW); low power option available for use outside the U.S.A.- limited to 10 dBm (10 mW)

RF communication protocol

IEEE 802.15.4

Range for bi-directional RF link

70 m to 2 km line of sight with RF power setting

Power source

Internal: 3.7 V dc, 650 mAh rechargeable battery

External: 3.2 V dc to 9 V dc

Power consumption

 

1 burst /10 minutes: 2.9373 mA (10.57 mW), 1 burst/hr: 0.6957 mA (2.50 mW), 1 burst/4 hrs: 0.2875 mA (1.04 mW), 1 burst/24 hrs: 0.1738 mA (0.63 mW) (all sampling @ 10 kHz with 5 second burst duration). See battery life calculator: http://www.microstrain.com/iepe- link-lxrs-battery-life-calculator

Operating temperature

-20 ˚C to +60 ˚C (-40 ˚C to +85˚C available with external battery)

Physical Specifications

Dimensions

94 mm x 79 mm x 21 mm

Weight

114 grams

Enclosure material

Aluminum

Environmental rating

Indoor use

Integration

Compatible gateways

All WSDA® base stations and gateways

Compatible sensors

IEPE type sensors that operate within the node input specifications and have an output within ± 5 V dc (custom options available)

Connectors

10-32 coaxial (IEPE input), terminal block (future use)

Software

SensorCloud™, SensorConnect™, Node Commander®, Windows 7 (or newer)

Software development

Open-source MicroStrain Communications Library (MSCL) with sample code available in C++,Python,and.NET formats (OS and computing platform independent): http://lord-microstrain.github.io/MSCL/

Regulatory compliance

FCC (U.S.), IC (Canada), ROHS

 

General

Sensor input channels

Differential analog, 4 channels

Integrated sensors

Triaxial MEMS accelerometer, 3 channels

Internal temperature, 1 channel

Data storage capacity

2 M bytes (up to 1,000,000 data points, data type dependent)

Analog Input Channels

Measurement range

Differential: full-bridge, 350 Ω (factory configurable)

Accuracy and resolution

± 0.1% full scale typical, 16 bit resolution

Anti-aliasing filter bandwidth

Single-pole Butterworth

-3 dB cutoff @ 250 Hz

Bridge excitation voltage

+2.7 V dc, 50 mA total for all channels

(pulsed @ sample rates 16 Hz to conserve power)

Measurement gain and offset

User-selectable in software on differential channels gain values from 104 to 1800

Integrated Accelerometer Channels

Measurement range

± 16 g

Accuracy and resolution

± 4 mg, 13 bit resolution

Integrated Temperature Channel

Measurement range

-40 °C to 85 °C

Accuracy and resolution

± 2 °C (at 25 °C) typical, 16 bit resolution

Sampling

Sampling modes

Synchronized, low duty cycle, datalogging

Sampling rates

Continuous sampling: 1 sample/hour to 512 Hz

Periodic burst sampling: 32 Hz to 4096 Hz

Datalogging: 32 Hz to 4096 Hz

Sample rate stability

± 3 ppm

Network capacity

Up to 2000 nodes per RF channel (and per gateway) depending on the number of active channels and sampling settings. Refer to the system bandwidth calculator: http://www.microstrain.com/configure-your-system

Synchronization between nodes

± 32 μsec

Operating Parameters

Radio frequency (RF)

transceiver carrier

2.405 to 2.470 GHz direct sequence spread spectrum over 14 channels, license free worldwide, radiated power programmable from 0 dBm (1 mW) to 16 dBm (39 mW); low power option available for use outside the U.S.- limited to 10dBm (10mW)

Range for bi-directional RF link

70 m to 2 km line of sight with RF power setting

RF communication protocol

IEEE 802.15.4

Power source

Replaceable 3.7 V dc, 1.7 Ah Tadiran TL-5935 1/6 D-cell battery

Power consumption

960 uA ( 3.46 mW) @ 3.6 V dc, 32 HZ, 3 ch, no duty cycling

10.6 mA (38.16 mW) @ 3.6 V dc, 256 Hz, 3 ch, no duty cycling

4.0 mA (14.4 mW) @ 3.6 V dc, 256 Hz, 1 ch, no duty cycling

Operating temperature

-40 ˚C to + 85 ˚C

Acceleration limit

500 g standard (high g option available)

Physical Specifications

Dimensions

101 mm x 46 mm x 26 mm

Weight

150 g (including battery)

EMI/EMC rating

MIL-STD-461F

Enclosure material

Clear polycarbonate

Integration

Compatible gateways

All WSDA® base stations and gateways

Compatible sensors>

Bridge type analog sensors

Connectors

Flex cable terminal/solder pads (flex cable included)

Shunt calibration

Internal shunt calibration resistor 499 KΩ, differential channels<

Software<

SensorCloud™, SensorConnect™, Node Commander®, Windows 7 (or newer)

Software development

Open-source MicroStrain Communications Library (MSCL) with sample code available in C++,Python,and.NET formats (OS and computing platform independent): http://lord-microstrain.github.io/MSCL/

Regulatory compliance

FCC (U.S.), IC (Canada), ROHS

 

General Documentation

Technical Notes

Mechanical Drawings (uncontrolled)

Videos

General Documentation

Technical Notes

Mechanical Drawings (Uncontrolled)

Videos

Please fill out the following form.
If you would like to speak to someone directly call 802-862-6629.