Tech Note: Using a load cell with the new V-Link-200

  • By Collin
  • /
  • Published Wed, 04/12/2017 - 09:53

The V- Link- 200 is an 8- channel wireless analog sensor node with 4 differential input channels (strain channels) designed to support strain gauges and load cells.

An S Beam Load Cell with a 50-pound capacity and 3 mV/V sensitivity is being used for this example.

This technical note presents a step-by-step approach to connecting the load cell to the VLink-200, calibrating the load cell, and operating the system. Familiarity with the VLink-200, SensorConnect software and load cell operation is assumed.

To read the entire Tech Note, click here.