All LORD MicroStrain wireless sensor nodes, wireless base stations, and wireless sensor data aggregators are shipped from the factory with their radio frequency set to channel 15 (2.425 GHz).

This channel setting was established during 2012.

Previously all wireless products were set to channel 25 (2.475 GHz).

With the introduction of our LXRS radio technology, and its accompanying increase in radio strength and signal distance, the channel 25 radio frequency (2.475 GHz) and the channel 26 radio frequency (2.480 GHz) created harmonics on the edge of the Zigbee band that precludes their use.

All wireless products, both older and new, continue to support 14 channels running from channel 11 to channel 24.

Node Commander is a Windows software which will operate on XP Pro, Vista, Win 7 and Win 8.  Any computing platform, whether desktop, laptop, tablet, etc. which supports these standard Windows OS can be used for Node Commander.

The gateways (base stations and WSDA-1000) and the wireless nodes employ radios with these general specifications (see the individual product data sheet for any variations):

Radio frequency (RF) transceiver carrier 2.4 GHz direct sequence spread spectrum, license free worldwide (2.405 to 2.480 GHz) – 16 channels, radiated power programmable from 0 dBm (1 mW) to 16 dBm (39 mW); European models limited to 10 dBm (10 mW)
RF data packet standard IEEE 802.15.4, open communication architecture
RF data downloading 8 minutes to download full memory
Range for bi-directional RF link programmable communication range from 70 meters to 2 kilometers

 

 

 

 

Not what you're looking for? Visit our FAQ page or contact our Sales team.

Please fill out the following form.
If you would like to speak to someone directly call 802-862-6629.