Product no longer stocked – limited availability
Contact for pricing and lead time--a minimum order quantity may apply

The WSDA®-2000 is a network-ready gateway for high-speed, sophisticated data aggregation, with J1939 CAN and Ethernet interfaces

 

  • Compatible with LORD Sensing LXRS and LXRS+ sensor nodes
  • USB and Ethernet-based gateway configures, coordinates, and collects sensor data from a scalable network of wireless sensor nodes
  • Configurable to operate with a static IP, a DHCP-enabled LAN, or as a datalogger to local memory
  • Push all or selected sensor data to a J1939 CAN bus
  • Seamless integration with SensorCloud™ for secure, webbased data access from around the world
Datasheet Manual Software
Where to Buy?
U.S. International OEM

The WSDA® -1500 -LXRS® is a network-ready gateway for high- speed, sophisticated data aggregation, with J1939 CAN and Ethernet interfaces. 

Product Highlights

  • Ethernet-based gateway configures, coordinates, and collects sensor data from a scalable network of wireless sensor nodes
  • Configurable to operate with a static IP, a DHCP-enabled LAN, or as a datalogger to local memory
  • Push all or selected sensor data to a J1939 CAN bus
  • Seamless integration with SensorCloud™ for secure, web- based data access from around the world
Datasheet Manual Software
Where to Buy?
U.S. International OEM

High Performance

  • Lossless data throughput and synchronized node-to-node sampling of ±50 μS in LXRS+ and LXRS-enabled modes
  • Wireless range up to 2 km (800 m typical)

Ease of Use

  • Remote configuration, acquisition, and display of sensor data with SensorConnect
  • Data visualization through web-based SensorCloud portal for quick data navigation and analysis
  • Easy custom integration with open-source, comprehensive communications and command library (API)
  • Connect the gateway to a cellular or wi-fi modem for wireless connectivity to the host network

Cost Effective

  • Hundreds of sensors managed from a single gateway
  • Reduction of costs associated with wiring

Wireless Simplicity, Hardwired Reliability™

High Performance

  • Node-to-node synchronization up to ±32 microseconds
  • Lossless data throughput under most operating conditions
  • Extended wireless communication range to 2km

Ease of Use

  • Compatible with all LORD MicroStrain® sensor nodes
  • Remotely configure nodes, acquire and view sensor data with SensorConnect
  • Data visualization through web-based SensorCloud™ portal provides quick data navigation and analysis
  • Easy integration via comprehensive SDK
  • Connect the gateway to a cellular or wi-fi modem for wireless connectivity to the host network

Cost Effective

  • Thousands of sensors managed from a single gateway
  • Reduction of costs associated with wiring
General
Processor ARM® Cortex A8, 1 GHz
Operating system Linux
Connectivity Ethernet IEEE 802.3 10/100 Mbps, IEEE 802.15.4 and Proprietary wireless , J1939 CAN (output only), and USB 2.0 virtual Ethernet port
Internet standards HTTP, HTTPS,TCP/IP, UPnP,UDP
IP assignment IPV4 Static or DHCP
Data storage memory 4 G bytes Micro SD (optional upgrade to 8 or 16 GB)
Time synchronization Network time protocol (NTP), Real time clock (RTC), last used, manual entry
CAN J1939 Output
J1939 Bit Rate 250 K bps, 500 K bps, 1 M bps
J1939 Source Static or dynamic via SAE Name
J1939 Destination Static or SAE Name
J1939 Modes Tunnel data to destination using PGN 0xEF00, or
broadcast data values using PGNs 0xFF00 – 0xFFFF
Standard bus termination 120 Ω
Sampling
Supported node sampling modes Synchronized, low duty cycle, continuous, periodic burst, event-triggered, and datalogging
Synchronization beacon interval 1 Hz beacon provides ± 50 μsec node-to-node
synchronization
Synchronization beacon
stability
± 5 ppm
Network capacity Up to 2000 nodes per RF channel (& per gateway) depending on number of active channels and sampling
settings. See system bandwidth calculator:
http://www.microstrain.com/configure-your-system
Operating Parameters
Wireless communication range
 

Typical*

Ideal**

LXRS

1 km

2 km

LXRS+

400 m

1 km

Radio frequency (RF)
transceiver carrier
License-free 2.405 to 2.480 GHz with 16 channels
RF communication protocol IEEE 802.15.4 and Proprietary
RF transmit power User-adjustable from 0 dBm to 20 dBm. Power output restricted regionally to operate within legal requirements
Power source 9.0 to 30.0 V dc (universal 15 V dc, 1.3 A AC/DC
converter included in starter kit)
Power consumption 2850 mW (max), 2400 mW (typ) @ 15 V
Operating temperature -40 °C to +85 °C
Physical Specifications
Dimensions 147 mm x 110 mm x 23 mm without antenna
Weight 343 grams
Enclosure material Black anodized aluminum
Integration
Connectors USB, RJ45 jack, 26 pin multi-port, 2.1mm power jack
Communications cable USB, Ethernet (CAT6 cable included in starter kit)
Compatible nodes All LORD Sensing LXRS® and LXRS+ nodes
Firmware Firmware and OS upgradeable through web interface
Software SensorCloud SensorConnect 8.3 or newer, Windows 7, 8 & 10 compatible
Regulatory compliance TBD

General

Processor

ARM® CortexA8, 1 GHz

Operating system

Linux

Connectivity

Ethernet IEEE 802.3 10/100 Mbps, IEEE 802.15.4 wireless, J1939 CAN (output only)

Internet standards

HTTP, HTTPS,TCP/IP, UPnP

IP assignment

IPV4 Static or DHCP

Data storage memory

4 G bytes Micro SD (optional upgrade to 8 GB or 16 GB)

Time synchronization

Network time protocol (NTP), Real time clock (RTC), last used, manual entry

CAN J1939 Output

J1939 Bit Rate

250 K bps, 500 K bps, 1 M bps

J1939 Source

Static or dynamic via SAE Name

J1939 Destination

Static or SAE Name

J1939 Modes

Tunnel data to destination using PGN 0xEF00, or broadcast data values using PGNs 0xFF00 – 0xFFFF

Standard bus termination

120 Ω

Sampling

Supported node sampling modes

Synchronized, low duty cycle, continuous, periodic burst, event-triggered, and datalogging

Synchronization beacon interval

1 Hz beacon provides ± 32 μsec node-to-node synchronization

Synchronization beacon stability

± 3 ppm

Network capacity

Up to 2000 nodes per RF channel (and per gateway) depending on the number of active channels and sampling settings. Refer to the system bandwidth calculator: http://www.microstrain.com/configure-your-system

Operating Parameters

Radio frequency (RF)

transceiver carrier

2.405 to 2.470 GHz direct sequence spread spectrum over 14 channels, license-free worldwide, radiated power programmable from 0 dBm (1 mW) to 16 dBm (39 mW); (low power option available for use outside the U.S.A.- limited to 10 dBm (10 mW)

RF communication protocol

IEEE 802.15.4

Range for bi-directional RF link

70 m to 2 km line of sight with RF power setting

Power source

9.0 to 36.0 V dc

(universal 12 V dc, 1.67 A included in starter kit)

Power consumption

@ 36 V dc maximum 3200 mW, typical 2450 mW

@ 12 V dc maximum 2900 mW, typical 2300 mW

Operating temperature

-40 °C to +85 °C

MTBF 408,000 hours (Telcordia method, SR332)

Physical Specifications

Dimensions

147 mm x 110 mm x 23 mm without antenna

Weight

346 grams

Enclosure material

Black anodized aluminum

Integration

Connectors

RJ45 jack, 26 pin multi-port, 2.1mm power jack

Communications cable

Ethernet (CAT6 cable included in starter kit)

Compatible sensor nodes

All LXRS® sensor nodes, all legacy 2.4 GHz nodes

Firmware

Firmware and OS upgradeable through web interface

Software

SensorCloud™, SensorConnect™, Node Commander®, WSDA® Data

Downloader, Live Connect, Windows 7 (or newer)

Software development

Open-source MicroStrain Communications Library (MSCL) with sample code available in C++,Python,and.NET formats (OS and computing platform independent): http://lord-microstrain.github.io/MSCL/

Regulatory compliance

FCC (U.S.), IC (Canada), ROHS, CE

 

Please fill out the following form.
If you would like to speak to someone directly call 802-862-6629.