The LORD Sensing ML5-AR, Attitude Reference, delivers low-cost precision measurements of dynamic inclination, acceleration and angular rate in challenging environments specifically designed for those encountered by heavy-duty construction, off-highway, agriculture, mining and trucking industries.
The ML5-AR utilizes the power of a sophisticated Auto-Adaptive Extended Kalman Filter (EKF) to remove errors associated with vibration, sudden linear motions and quake, resulting in a true reading of inclination under all conditions.
State-of-the-art temperature compensation and calibration assures error-free performance over the full operational temperature range.
The compact size, wide 4.5 to 36 V power range, IP68/IP69K rating and CAN J1939 or CANopen communications interface make the ML5-AR a single part solution for a full range of vehicle sizes and applications.
EVALUATION UNITS AVAILABLE
Datasheet
The G-Link-200-OEM is a small, wireless 3-axis accelerometer ready for OEM integration. The G-Link-200-OEM provides extremely low noise waveform data, ideal for vibration, impact, motion, and tilt applications. Additionally, derived vibration parameters allow for long-term condition monitoring and predictive maintenance.
Lord wireless sensor networks are fast to deploy and provide reliable, lossless data throughput. These networks are proven to work in demanding industries where reliable data acquisition is critical.
Datasheet
Manual
Lord wireless sensor networks are fast to deploy and provide reliable, lossless data throughput. These networks are proven to work in demanding industries where reliable data acquisition is critical.
The G-Link-200 is a battery powered wireless 3-axis accelerometer with a rugged, weatherproof enclosure. The G-Link-200 provides extremely low noise waveform data, ideal for vibration, impact, motion, and tilt applications. Additionally, derived vibration parameters allow for long-term condition monitoring and predictive maintenance.
Datasheet
The LORD Sensing MV5-AR brings a new level of precision to measurements of dynamic inclination, acceleration and angular rate in challenging environments such as those encountered by heavy-duty construction, off-highway, agriculture, and trucking industries.
The MV5-AR utilizes the power of a sophisticated Auto-Adaptive Extended Kalman Filter (EKF) to remove errors associated with vibration, sudden linear motions, and quake, resulting in a true reading of inclination under all conditions. Its power and mounting flexibility make it a single-part solution for a variety of vehicle applications.
Datasheet
The MV5-AR utilizes the power of a sophisticated Auto-Adaptive Extended Kalman Filter (EKF) to remove errors associated with vibration, sudden linear motions, and quake, resulting in a true reading of inclination under all conditions. Its power and mounting flexibility make it a single-part solution for a variety of vehicle applications.
List Price:
$495
List Price:
$549
List Price:
$495
Best in Class Performance
- Full accuracy over the entire operational temperature range of -40° C to 85° C
- High performance 6-DOF MEMs sensor suite provides best possible accuracy regardless of mounting angle
- Auto-Adaptive EKF provides best dynamic accuracy
- LORD Sensing mechanical isolation technology used internally for high shock resistance and reliability.
- Based on LORD Sensing's proven 5th generation industrial/aerospace solid-state MEMS accelerometer and gyro inertial sensor technology
Ease of Use
- Compact and rugged reinforced PBT housing is fully sealed for immersion, pressure wash (IP67, IP69K)
- Low-cost, rugged, reliable AMPSEAL 16 connector
- Optional metal guard plate protects sensor and connector - permits connector insertion/removal
- Low-cost, compact size, and full 360° measurement range about all axis permits single part number inventory for a variety of vehicle sizes and applications
- CAN J1939 communication
Cost Effective
- Standard or custom configurations
- Out-of-the-box solution reduces development time
- Integrated 3 axis high performance accelerometer
- ±2/4/8G and ±10/20/40G range options
- DC to 1KHz accelerometer bandwidth
- 20-bit Signal Conditioner
- Extremely low noise density 25 µg/√Hz
- User controlled High- and Low-Pass Digital Filters
- On-board high precision temperature sensor(+/- 0.1°C)
- –40 to +85 °C operating temperature range
- IP67 Rating
- 303 series stainless steel mounting base with ¼ 28 UNF mounting hole
- 3 on-board high capacity ½ AA 3.6V LiSOCL2 Batteries (13.0Wh)
Best in Class Performance
- Full accuracy over the entire operational temperature range of -40° C to 85° C
- High performance 6-DOF MEMs sensor suite provides best possible accuracy regardless of mounting angle
- Auto-Adaptive EKF provides best dynamic accuracy
- LORD Sensing mechanical isolation technology used internally for high shock resistance and reliability.
- Based on LORD Sensing's proven 5th generation industrial/aerospace solid-state MEMS accelerometer and gyro inertial sensor technology
Ease of Use
- Compact and rugged reinforced PBT housing is fully sealed for immersion, pressure wash (IP67, IP69K)
- Low-cost, rugged, reliable AMPSEAL 16 connector
- Optional metal guard plate protects sensor and connector - permits connector insertion/removal
- Low-cost, compact size, and full 360° measurement range about all axis permits single part number inventory for a variety of vehicle sizes and applications
- CAN J1939 communication
Cost Effective
- Standard or custom configurations
- Out-of-the-box solution reduces development time
Sensor
-
High performance high-g accelerometer
- 120 µg/√Hz
- ±8 g range
- Pitch-roll dynamic accuracy ±0.5°
- Attitude resolution 0.02°
- Fully calibrated and temperature compensated
–40 to +85°C
Operation
- Adjustable sampling rates up to 500Hz (100Hz default)
- Triple power flexibility:
- 5V regulated
- 12V unregulated vehicle bus
- 24V unregulated vehicle bus
- Single CAN command adjusts for any mounting orientation
- Fully compliant to strict automotive and off-highway test standards
Package
- PBT Thermoplastic, Reinforced, Hermetically sealed
- Ingress protection IP68, IP69K
-
Highly compact and low profile
- 80.0mm x 55.0mm x 24.0mm
- 120 grams
- J1939 or CANopen bus interface options
- 3 x M8, mounting holes
- –40 to +85°C operating temperature range
Sensor Input
- Integrated 3-axis high performance accelerometer
- DC to 1KHz bandwidth
-
Adjustable input range
- ±2/4/8G (G-Link-200-OEM-8G)
- ±10/20/40G (G-Link-200-OEM-40G)
-
Extremely low noise density
- 25 µg/√Hz (G-Link-200-OEM-8G)
- 80 µg/√Hz (G-Link-200-OEM-40G)
- Programmable high- and low-pass digital filters
- On-board temperature sensor (+/- 0.25°C)
- Tilt (±1° accuracy, <0.1° precision)
Operation
- Adjustable sampling rate up to 4 kHz
- Continuous, periodic burst, or event-triggered operation
- LXRS protocol allows lossless data collection, scalable network size, and node synchronization of ±50 µs
- Output acceleration waveform data, tilt, and/or derived vibration parameters (Velocity, Amplitude, Crest Factor)
- Datalogging up to 8 million data points
- Wireless range up to 1km
Package
- Power with 3.3 to 36 VDC
- –40 to +85 °C operating temperature range
- Humiseal 1B31 Conformal Coating
- 4 mounting holes sized for 2-56 UNC
- Optional aluminum base and power terminal
- Antenna options include on-board, MMCX, or U.FL connector
Sensor
- Integrated 3-axis high performance accelerometer
- DC to 1KHz bandwidth
-
Adjustable input range
- ±2/4/8G (G-Link-200-8G)
- ±10/20/40G (G-Link-200-40G)
-
Extremely low noise density
- 25 µg/√Hz (G-Link-200-8G)
- 80 µg/√Hz (G-Link-200-40G)
- Programmable high- and low-pass digital filters
- On-board temperature sensor (+/- 0.25°C)
- Tilt (±1° accuracy, <0.1° precision)
Operation
- Adjustable sampling rate up to 4 kHz
- Continuous, periodic burst, or event-triggered operation
- LXRS protocol allows lossless data collection, scalable network size, and node synchronization of ±50 µs
- Output acceleration waveform data, tilt, and/or derived vibration parameters (Velocity, Amplitude, Crest Factor)
- Datalogging up to 8 million data points
- Wireless range up to 1km
Package
- IP-67 weatherproof enclosure
- Stainless steel base
- ¼ 28 UNF mounting hole or optional magnetic base
- 3 on-board ½ AA 3.6V LiSOCL2 batteries
- –40 to +85 °C operating temperature range
Compliance
- Amusement Ride Characterization, G-Link-200-R
Sensor
-
High performance high-g accelerometer
- 85 µg/√Hz
- ±20 g range
- Pitch-roll dynamic accuracy ±0.2°
- Attitude resolution 0.05°
- Fully calibrated and temperature compensated
–40 to +85°C
Operation
- Adjustable sampling rates up to 500Hz (100Hz default)
- Triple power flexibility:
- 5V regulated
- 12V unregulated vehicle bus
- 24V unregulated vehicle bus
- Single CAN command adjusts for any mounting orientation
- Fully compliant to strict automotive and off-highway test standards
Package
- PBT Thermoplastic, Reinforced, Hermetically sealed
- Ingress protection IP68, IP69K
-
Highly compact and low profile
- 80.0mm x 55.0mm x 24.0mm
- 120 grams
- J1939 or CANopen bus interface options
- 3 x M8, mounting holes
- –40 to +85°C operating temperature range
General Documentation
Technical Notes
General Documentation
General Documentation
Technical Notes
Please use the form below to contact us or call 802 862 6629.
