The 3DM-DH®​3 is a downhole orientation sensor and datalogger. It incorporates acceleration sensors, magnetic field sensors, and temperature sensors, together with an on-board microprocessor, embedded software algorithm, non-volatile memory for configuration, flash datalogging memory, and serial communication interface. Its form-factor, rated temperature range and power supply requirements are optimized for downhole applications. The 3DM-DH3 provides accurate drill path measurements including Inclination, Azimuth, GTF, MTF, Dip Angle, sensor temperatures, G-TOT and H-TOT.

Datasheet Manual
Where to Buy?
U.S. International OEM

List Price:
$2,495.00

Best in Class

  •     Precise downhole orientation
  •     High-speed sample rate & flexible data outputs
  •     Extended use, low-power data logging

Easiest to Use

  •     Rapid deployment in the drill string
  •     Outputs drill path measurements

Cost Effective

  •     Reduced cost and rapid time to market for customer’s applications
  •     Aggressive volume discount schedule

Orientation range

360˚ all axes (orientation angles); inclination, azimuth, GTF, MTF, Dip Angle, G-TOT, H-TOT

A/D resolution

24 bits accelerometer; 16 bits magnetometer

Angle resolution

0.02˚

Accuracy

± 0.2˚ inclination

± 0.5˚ azimuth

Angle measurement repeatability

0.1 °

Digital output rate/logging rate

up to 8 Hz

Output modes

acceleration and magnetic field vectors plus temperature; orientation angles plus temperature

Digital output

RS-422 serial (four-wire full-duplex) standard

Serial data rate

115200 baud

Datalogging capacity

up to 32,768 data records

Supply voltage

+6.0 VDC min, +10.0 VDC max

Supply current

50 mA typical when connected to host

16 mA typical when logging at 8Hz

500 μA typical when logging at 1/4 Hz

50 μA typical in deep sleep mode

Connectors

through hole PCB pads (solder-in)

2 mm pitch, 2 row 16 pin header

Operating Temperature

- 40 ˚C to 125 ˚C (-10 ˚C to 125 ˚C with recommended batteries)

Dimensions

177 mm x 21 mm diameter

Weight

91 grams

Shock limit

500 g

Enclosure material

anodized aluminum

Software

Windows XP, Vista, 7

Please fill out the following form.
If you would like to speak to someone directly call 802-862-6629.