Legacy Product Documentation

General Documentation

• G-Link®-LXRS® Product Datasheet
• G-Link®-LXRS®  Quick Start Guide
• G-Link®-LXRS®  User Manual
• Node Commander Wireless Sensing Software User Manual
• Wireless Products Comparison

Technical Notes

• G-Link®-LXRS®Factory Calibration Options
• Powering a Wireless Node with Sources Greater Than 9 Volts
• LXRS® Firmware Upgrades
• Outputting a 4 to 20 mA Current Loop
• Battery Use and Replacement
• IP and NEMA Rated Enclosures for Wireless Nodes
• Using a G-Link®-LXRS™ as a Dual Axis Tilt Sensor
• G-Link®-LXRS™ Power Profile
• Wireless Sensor Node Power Profiles
• Using External Power With Wireless Sensor Nodes
• Synchronized Sampling on Startup

Mechanical Drawings (Uncontrolled)

• G-Link®-2G-LXRS® Dimensional Drawing
• G-Link®-10G-LXRS® Dimensional Drawing
• 6306-0100 G-Link-IP66-ENCL 
• 6306-0200 G-Link-IP66-XL-ENCL 
• 6306-0300 G-Link-IP65-XXL-ENCL
• 6306-0100 IP66/NEMA4X Enclosure for G-Link^®-LXRS^®
• 6306-0200 IP66/NEMA4X Enclosure for G-Link®-LXRS®  (1 battery)
• 6306-0300 IP65/NEMA4X Enclosure for G-Link®-LXRS®  (3 batteries)

Videos

• NC QSG #1 General Communications
• NC QSG #2 Node Configuration
• NC QSG #3 Real-Time Streaming
• NC QSG #4 Legacy Low Duty Cycle
• NC QSG #5 Synchronized Sampling
• NC QSG #6 Armed Data Logging

General Documentation

• 3DM-GX4-45™ Product Datasheet
• 3DM-GX4-45™ Quick Start Guide
• 3DM-GX4-45™ User Manual
• 3DM-GX4-45™ Data Communications Protocol
• Inertial Product Comparison
• 3DM-GX4™ Products Declaration of Conformity

Technical Notes

• Migrating From a 3DM-GX3® Series Sensor to a 3DM-GX4™
• Using a Hardware Datalogger with a 3DM-GX4™
• 3DM-GX4-45™ Communication and Power Connector
• Using a 3DM-GX4-45™ with Bluetooth® RS-232 Adapters
• Using a Chip-Size Antenna

Mechanical Prints (Uncontrolled)

• GPS Antenna Specifications
• GPS Antenna Mounting
• 6224-0100 Craft Cable with Micro DB9 and 9 flying leads
• 6212-1040 Micro D-to-USB Communication and Power Cable
• 6212-1000 Micro D-to-RS232 Communication and Power Cable

Video

• Hard & Soft Iron Calibration
• Enabling Robotic Attitude Sensing and Autonomous Navigation Through Inertial Sensor Technology
• 3DM-GX4™ inertial sensor family overview video

General Documentation

• V-Link®-LXRS® Product Manual
• V-Link®-LXRS® Product Datasheet
• V-Link®–LXRS® Quick Start Guide
• V-Link®-LXRS® Document of Conformity
• Node Commander Wireless Sensing Software User Manual
• Wireless Products Comparison

Technical Notes

• Powering a Wireless Node with Sources Greater Than 9 Volts
• High Cycle Vibration and Function Test
• Event Driven Sampling
• Measuring Voltages Above 3 Volts with V-Link®-LXRS®
• LXRS® Firmware Upgrades
• Using a 4 to 20 mA Pressure Transducer
• Control a Relay with a Wireless Node
• Measuring Small Current
• Measuring Small Voltages
• Outputting a 4 to 20 mA Current Loop
• Using Pressure Transducers
• Battery Use and Replacement
• V-Link®-LXRS®  350 Ohm Tester Board
• V-Link®-LXRS®  1000 Ohm Tester Board
• V-Link®-LXRS® Pin Assignments
• Using the 50g, 100g, 200g or 500g Triaxial Accelerometer Cube
• IP and NEMA Rated Enclosures for Wireless Nodes
• Calculating a Linear Slope with Microsoft Excel®
• Using a Load Cell with V-Link®-LXRS™ and SG-Link®-LXRS®
• V-Link®-LXRS® Power Profile
• Wireless Sensor Node Power Profiles
• Using External Power With Wireless Sensor Nodes
• Using the DEMOD-DC® with V-Link®-LXRS® and SG-Link®-LXRS®
• Synchronized Sampling on Startup
• Distance Measurement with an IR Sensor
• Using Differential Inputs for a RTD

Mechanical Drawings (Uncontrolled)

• V-Link®–LXRS® Dimensional Drawing
• 6313-3100 V-Link-IP66-XL-ENCL
• 6313-3100 IP66/NEMA4X Enclosure for V-Link®-LXRS®  (2 batteries)

Videos

• NC QSG #1 General Communications
• NC QSG #2 Node Configuration
• NC QSG #3 Real-Time Streaming
• NC QSG #4 Legacy Low Duty Cycle
• NC QSG #5 Synchronized Sampling
• NC QSG #6 Armed Data Logging

General Documentation

• RTD-Link-LXRS Product Datasheet
• RTD-Link-LXRS Quick Start Guide
• Node Commander Wireless Sensing Software User Manual
• Wireless Products Comparison

Technical Notes

• Powering a Wireless Node with Sources Greater Than 9 Volts
• LXRS® Firmware Upgrades
• Synchronized Sampling on Startup

Videos

• NC QSG #1 General Communications
• NC QSG #4 Legacy Low Duty Cycle
• NC QSG #6 Armed Data Logging

General Documentation

• TC-Link®-1CH-LXRS® Product Datasheet
• TC-Link®-1CH-LXRS® Quick Start Guide
• Node Commander Wireless Sensing Software User Manual
• Wireless Products Comparison

Mechanical Prints (Uncontrolled)

• TC-Link®-1CH-LXRS® Dimensional Drawing

General Documentation

• SG-Link®-LXRS® Product Datasheet
• SG-Link®-LXRS® Quick Start Guide
• SG-Link®-LXRS® User Manual
• Node Commander Wireless Sensing Software User Manual
• Wireless Products Comparison

Technical Notes

• Powering a Wireless Node with Sources Greater Than 9 Volts
• Measuring Voltages Above 3 Volts with SG-Link®-LXRS®
• Using a Load Cell with SG-Link®-LXRS®
• LXRS® Firmware Upgrades
• Control a Relay with a Wireless Node
• Measuring Small Current
• Outputting a 4 to 20 mA Current Loop
• Using Pressure Transducers
• Battery Use and Replacement
• SG-Link® 350 Ohm Tester Board
• SG-Link® 1000 Ohm Tester Board
• IP and NEMA Rated Enclosures for Wireless Nodes
• SG-Link®-LXRS™ Power Profile
• Wireless Sensor Node Power Profiles
• Using External Power With Wireless Sensor Nodes
• Using the DEMOD-DC® with V-Link®-LXRS® and SG-Link®-LXRS®
• Synchronized Sampling on Startup
• Differential Analog Input Frequency Response Testing
• Distance Measurement with an IR Sensor
• Using Differential Inputs for a RTD

Mechanical Drawings (uncontrolled)

• SG-Link®-LXRS® Dimensional Drawing
• 6309-3000 SG-Link-IP66-ENCL 
• 6309-4000 SG-Link-IP66-XL-ENCL 
• 6309-5000 SG-Link-IP65-XXL-ENCL
• 6309-3000 IP66/NEMA4X Enclosure for SG-Link®-LXRS®
• 6309-4000 IP66/NEMA4X Enclosure for SG-Link®-LXRS®  (1 battery)
• 6309-5000 IP65/NEMA4X Enclosure for SG-Link®-LXRS®  (3 batteries)

Videos

• NC QSG #1 General Communications
• NC QSG #2 Node Configuration
• NC QSG #3 Real-Time Streaming
• NC QSG #4 Legacy Low Duty Cycle
• NC QSG #5 Synchronized Sampling
• NC QSG #6 Armed Data Logging

General Documentation

• WSDA-Base-104 Product Datasheet
• WSDA-Base-104 Document of Conformity
• WSDA-Base-104 USB Output Base Station User Guide
• Node Commander Wireless Sensing Software User Manual
• Wireless Products Comparison

Mechanical Prints (Uncontrolled)

• WSDA®-Base-104 Dimensional Drawing

Technical Notes

• Synchronized Sampling on Startup

General Documentation

• 3DM-GX3® -35 Product Datasheet
• 3DM-GX3® -35 Quick Start Guide
• 3DM-GX3® -35 Data Communications Protocol Manual 
• 3DM-GX3® Data Communications Protocol Errata
• Firmware Upgrades for 3DM-GX3®
• MIP Hard and Soft Iron Calibration Quick Start Guide
• 3DM-GX3® -35 Declaration of Conformity
• Inertial product comparison

Technical Notes

• 3DM-GX3® Importing Magnetic Vectors
• Extending the USB Cable
• Using an Hardware Datalogger with Inertial Sensors
• 3DM-GX3® Startup Settings
• Using Dataloggers with Inertial Sensors
• Using u-blox Software with 3DM-GX3^®-35 and 3DM-GX3^®-45
• Outputting NMEA Packets to GPS Ready Software
• Phihong PSA05R-090 Power Supply
• GPS Antenna Performance Comparison
• 3DM-GX3® -35 Communication and Power Connector

Mechanical Prints (Uncontrolled)

• 3DM-GX3® -35 Sensor Origin
• 3DM-GX3® GPS Antenna
• Gilsson Antenna Mounting
• 3DM-GX3®-25/35/45 Mounting Holes
• 3065-7046 3DM-GX3® -35 Enclosure Lid Drawing
• 3065-7045 3DM-GX3® -35 Enclosure Base Drawing
• 6224-0100 Craft Cable with Micro DB9 and 9 flying leads
• 6225-4220 3DM-GX3® -35 Dimensional Drawing
• 6212-1040 9022-0019 Micro D-to-USB Communication and Power Cable
• 6212-1000 4005-0037 Micro D-to-RS232 Communication and Power Cable

Video

• Hard & Soft Iron Calibration
• Enabling Robotic Attitude Sensing and Autonomous Navigation Through Inertial Sensor Technology

General Documentation

• 3DM-GX3® -15-OEM Datasheet
• 3DM-GX3® -15 Quick Start Guide
• 3DM-GX3® -15,-25 MIP Data Communications Protocol
• 3DM-GX3® Data Communications Protocol Errata
• MIP Software Downloads
• Firmware Upgrades for 3DM-GX3®
• 3DM-GX3® -15 OEM Mounting and Connector Information
• Inertial product comparison

Technical Notes

• Extending the USB Cable
• Using an Hardware Datalogger with Inertial Sensors
• 3DM-GX3® Startup Settings
• Using Dataloggers with Inertial Sensors
• Phihong PSA05R-090 Power Supply

Mechanical Prints (Uncontrolled)

• OEM USB Cable Assembly

General Documentation

• 3DM-GX3® -45 Product Datasheet
• 3DM-GX3® -45 Theory of Operation
• 3DM-GX3® -45 Quick Start Guide
• MIP Hard and Soft Iron Calibration Quick Start Guide
• 3DM-GX3®-45 MIP Data Communications Protocol
• 3DM-GX3® Data Communications Protocol Errata
• 3DM-GX3® -45 Declaration of Conformity

Technical Notes

• 3DM-GX3® Importing Magnetic Vectors
• Selecting a Gyroscope Option
• Extending the USB Cable
• Using an Hardware Datalogger with Inertial Sensors

• 3DM-GX3® Startup Settings
• Using Dataloggers with Inertial Sensors
• Using u-blox Software with 3DM-GX3^®-35 and 3DM-GX3^®-45
• Outputting NMEA Packets to GPS Ready Software
• Using the 3DM-GX3^® -45 with Bluetooth™ RS-232 Adapters
• Phihong PSA05R-090 Power Supply
• GPS Antenna Performance Comparison
• 3DM-GX3® -45 Firmware Errata
• 3DM-GX3® -45 Communication and Power Connector

Mechanical Prints (Uncontrolled)

• 3DM-GX3® -45 Mounting Diagram
• 3DM-GX3® GPS Antenna
• Gilsson Antenna Mounting
• 3DM-GX3® -45 STP file
• 3DM-GX3®-25/35/45 Mounting Holes
• 6224-0100 Craft Cable with Micro DB9 and 9 flying leads
• 3065-7046 3DM-GX3-45® Enclosure Lid Drawing
• 3065-7045 3DM-GX3-45® Enclosure Base Drawing
• 6225-4220 3DM-GX3-45® Dimensional Drawing
• 6212-1040 9022-0019 Micro D-to-USB Communication and Power Cable
• 6212-1000 4005-0037 Micro D-to-RS232 Communication and Power Cable

FAQ's

• 3DM-GX3® -45 FAQ's

Video

• 3DM-GX3-45® Flight Test
• Hard & Soft Iron Calibration
• Enabling Robotic Attitude Sensing and Autonomous Navigation Through Inertial Sensor Technology

Firmware Upgrade

• Firmware Upgrades for 3DM-GX3®

Software Download

• MIP Software Downloads

Software Development Kit

• MIP LabVIEW Sample Code
• 3DM-GX3® -35 and 3DM-GX3® -45 MIP MATLAB code sample

• MIP C Code Sample for Windows and Linux Version 1.1

General Documentation

• 3DM® Product Datasheet
• 3DM® Software Manual
• 8200-0009 (SOFTWARE, 3DM)

Mechanical Prints

• 3DM® Orientation, Case Dimensions and Wiring Connector
• 3DM® PCB Dimensions
• 3DM® Communication/Power Cable

Technical Notes

• Orientation Conversion Formulas

Software

• 8200-0009 (SOFTWARE, 3DM)

• Product Datasheet
• Inertia-Link® and 3DM-GX2®
  Quick Start
• 8200-0002 (SOFTWARE, INERTIA-LINK_3DM-GX2)

General Documentation

• 3DM-GX3® -15 Datasheet
• 3DM-GX3® -15 Quick Start Guide
• 3DM-GX3® -15,-25 MIP Data Communications Protocol
• 3DM-GX3® Data Communications Protocol Errata
• 3DM-GX3® -15 Declaration of Conformity

Technical Notes

• Extending the USB Cable
• Using an Hardware Datalogger with Inertial Sensors
• 3DM-GX3® Startup Settings
• Using Dataloggers with Inertial Sensors
• Phihong PSA05R-090 Power Supply
• 3DM-GX3® -15 Communication and Power Connector

Mechanical Prints

• 3DM-GX3® -15 STP file
• 3DM-GX3® -15 Mounting Diagram
• 6212-1000 4005-0037 Micro D-to-RS232 Communication and Power Cable
• 6224-0100 Craft Cable with Micro DB9 and 9 flying leads
• 6212-1040 9022-0019 Micro D-to-USB Communication and Power Cable

Firmware Upgrade

• Firmware Upgrades for 3DM-GX3®

Software Download

• MIP Software Downloads

Software Development Kit

• MIP LabVIEW Sample Code
• 3DM-GX3-15,-25 MIP Software Development Kit

General Documentation

• DEMOD-DVRT-TC Datasheet
• Microminiature and Subminiature DVRT® Quick Start Guide
• Microminiature and Subminiature Gauging DVRT® Quick Start Guide
• Displacement System Chart
• Motherboard Quick Start Guide

Technical Notes

• DVRT vs. LVDT Comparison

Mechanical Print (Uncontrolled)

• LEMO Connector Assembly pdf 6129-0000 CBL1
• LEMO Connector Wiring Diagram 

General Documentation

• DVRT-Link™-LXRS® Product Datasheet
• DVRT-Link™-LXRS® Quick Start Guide
• Microminiature and Subminiature Gauging DVRT® Quick Start Guide
• Non-Contact DVRT® Quick Start Guide
• Node Commander Wireless Sensing Software User Manual
• Wireless Products Comparison

Technical Notes

• Powering a Wireless Node with Sources Greater Than 9 Volts
• LXRS® Firmware Upgrades
• Outputting a 4 to 20 mA Current Loop
• Wireless Sensor Node Power Profiles
• DVRT-Link™-LXRS® Power Profile
• Battery Use and Replacement
• DVRT-Link™-LXRS® Understanding the Calibration
• Using External Power With Wireless Sensor Nodes
• Synchronized Sampling on Startup

Mechanical Prints (Uncontrolled)

• DVRT-Link™-LXRS® Dimensional Drawing

Videos

• NC QSG #1 General Communications
• NC QSG #2 Node Configuration
• NC QSG #3 Real-Time Streaming
• NC QSG #4 Legacy Low Duty Cycle
• NC QSG #5 Synchronized Sampling
• NC QSG #6 Armed Data Logging

General Documentation

• ENV-Link™-Pro-LXRS® Datasheet
• ENV-Link™-Pro -LXRS® Sensors Datasheet
• Node Commander Wireless Sensing Software User Manual
• MicroStrain Wireless Sensor Networks LXRS™ Data Communications Protocol
• Wireless Products Comparison

Software Development Kit

• MicroStrain Wireless Sensor Networks LXRS® Software Development Kit (SDK)

Technical Notes

• LXRS® Firmware Upgrades
• Outputting a 4 to 20 mA Current Loop
• Battery Use and Replacement
• Synchronized Sampling on Startup

FAQ's

• Lossless Extended Range Synchronized (LXRS™) Wireless Sensing System FAQs