High Performing CX and CV OEM Inertial Sensors
Interchangeable design, performance and reliability — the industry’s smallest and most capable inertial sensors
Inertial Sensors Designed with Power, Reliability and Flexibility
LORD Sensing inertial sensors C-series package provides an OEM form-factor that is optimized for size and weight in Off Highway, Unmanned Ground Vehicles/Mobile Robots and Unmanned Aerial Systems. It’s compact and low-profile anodized aluminum housing can be connected directly to a printed circuit board using a UART header or a Samtec FFSD ribbon cable and 2-56 fasteners. The C-series provides superior thermal and mechanical isolation compared to surface mount inertial sensors which are susceptible to board-induced stresses and poor hysteresis which can result in reduced accuracy and higher drift over time.
CX Series OEM Inertial Sensors
The CX series is an OEM version of our GX series and has identical performance and features at a much lower cost. The CX series of sensors is the top performer of our C-series OEM packaged devices. It features higher accuracy and stability over temperature than the CV line. As with the CL and CV line, the CX is available as an IMU, VRU, or AHRS. Additionally, we offer a GNSS/INS model with a 34 state Auto Adaptive EKF for outstanding position, velocity, and attitude performance.
CV Series OEM Inertial Sensors
The CV series of sensors offers lower cost, yet still high-performance inertial measurements in our C-series OEM package, which feature a very small, lightweight form factor. As with all our other inertial sensor families, these are available as an IMU, VRU, or AHRS, allowing you to choose and pay for only the functionality you need. These sensors excel where high performance is desired at a low cost and are a great middle ground between the CL and CX sensor lines.
Product Class
GNSS / INS
Features
- GNSS / GPS
- Magnetometer
- Gyroscope
- Accelerometer
Output
- All AHRS outputs, plus:
- GNSS / GPS
- Position
- Velocity
- Attitude
Tactical Grade
High Performance Grade
Industrial Grade
Product Class
AHRS
Features
- Magnetometer
- Gyroscope
- Accelerometer
Output
- All VRU outputs, plus:
- Heading
Tactical Grade
High Performance Grade
Industrial Grade
Product Class
VRU
Features
- Gyroscope
- Accelerometer
Output
- All IMU outputs, plus:
- Acceleration
- Angular Rate
Tactical Grade
High Performance Grade
Industrial Grade
Product Class
IMU
Features
- Gyroscope
- Accelerometer
Output
- Pitch and Roll
- Inclination
Tactical Grade
High Performance Grade
Industrial Grade
Applications
Off Highway Vehicles
- Compact, state-of-the art inertial sensors with proven fifth generation high-performance industrial grade solid-state MEMS accelerometer and gyro inertial sensor technology.
- Low-cost, compact size and full 360-degree measurement range about all axes
- Full accuracy over the entire operational temperature range of -40°C to 85°
- Auto-Adaptive Extended Kalman Filter for optimal dynamic accuracy and on-vehicle performance.
UNMANNED AERIAL SYSTEMS (UAS)
- Bias tracking, error estimation, threshold flags, and adaptive noise modeling allow for fine tuning to conditions in each application
- l Accelerometer noise as low as 25 ug/√Hz
- Smallest and lightest industrial AHRS with Adaptive Kalman Filter available
- Triaxial accelerometer, gyroscope, magnetometer, temperature sensors achieve the optimal combination of measurement qualities
- Dual on-board processors run a new Auto-Adaptive Extended Kalman Filter (EKF) for outstanding dynamic attitude estimates
MOBILE ROBOTICS
- Low-noise, linear, and stable MEMS gyros and accelerometers enable superior heading accuracy during turns & bumps
- Auto-adaptive Kalman Filter algorithms provide exceptional dynamic performance
- Auto self-calibration and automatic anomaly rejection make units with magnetometer reliable and accurate heading reference
- Fully calibrated and temperature compensated IMUs provide stable performance in demanding environments
Not sure which C-Series is right for you? Connect with one of our representatives and let us help you determine which sensors might work best for your application.
Contact Us