Title 2
Inertial Measurement Unit (IMU)
Product Status
New
Introduction
The MicroStrain 3DM-CX5-IMU is the smallest and lightest industrial IMU available. It features a fully calibrated and temperature compensated triaxial accelerometer and gyroscope to achieve the optimum combination of measurement qualities under all dynamic conditions. The 3DM-CX5-IMU is ideally suited for a wide range of applications, including platform stabilization, balancing robots, antenna pointing, and usage monitoring.
The CX product line has all the same features of the GX series in a cost-effective, system-integrator friendly package designed for volume production.
The CX product line has all the same features of the GX series in a cost-effective, system-integrator friendly package designed for volume production.
Features & Benefits
Best in Class Performance
- Fully calibrated, temperature-compensated, and mathematically-aligned to an orthogonal coordinate system for highly accurate outputs
- High-performance, low-drift gyros with noise density of 0.005°/sec/√Hz and VRE of 0.001°/s/g2RMS
- Accelerometer noise as low as 25 ug/√Hz
- Triaxial accelerometer, gyroscope, temperature sensors achieve the optimal combination of measurement qualities
- Smallest, lightest, highest performance IMU in its class
Ease of Use
- Easy integration via comprehensive and fully backwardscompatible communication protocol
- Robust, forward compatible MIP packet protocol
Cost Effective
- Out-of-the box solution reduces development time
- Volume discounts
Specifications
Sensor
-
High Performance Accelerometer
- 25 µg/√Hz (8g option)
- 80 µg/√Hz (20g option)
-
Super-stable Gyro
- 8 dph in-run bias (-40 to +85°C)
- Offset temperature hysteresis 0.05°/s
- ARW 0.3°/√hr
Operation
- Adjustable sampling rates up to 1000Hz
- Forward compatible MIP Protocol optimizes bandwidth
- Configurable IMU outputs
- SensorConnect software for configuration, control, display, and logging
Package
- CNC Anodized Aluminum
- Precision alignment features
- Highly compact and low profile
- 38 mm x 24 mm x 10.7 mm
- 12.0 grams
- TTL UART interface (up to 921600 BAUD)
- –40 to +85 °C operating temperature range
Product Taxonomy
MicroStrain 3dm-cx5-10
Applications
- Platform stabilization, artificial horizon
- Health and usage monitoring of vehicles
Discontinued
Documentation
General Documentation
Highlighted Docs
Software/Firmware
Summary
The LORD Sensing 3DM- CX5 family of high- performance, industrial -grade , board-level inertial sensors provides a wide range of triaxial inertial measurements and computed attitude and navigation solutions.
Price
$795
Compare Products?
Yes
Precedence
150
Datasheet URL
https://www.microstrain.com/sites/default/files/3dm-cx5-10_datasheet_8400-0114_rev_f.pdf
Software
/software
Add to shopify
(Meta)Description
Product Grade
Industrial
Packaging
OEM
High Performance Inertial Measurement Unit
OEM Package
Mouser Part Number
6275-4210
