The MV5-AR utilizes the power of a sophisticated Auto-Adaptive Extended Kalman Filter (EKF) to remove errors associated with vibration, sudden linear motions, and quake, resulting in a true reading of inclination under all conditions.

LORD Sensing's state-of-the-art temperature compensation and calibration assures error-free performance over the full operational temperature range.

Datasheet
Where to Buy?
U.S. International OEM

LORD Sensing Wireless Sensor Networks enable simultaneous, high-speed sensing and data aggregation from scalable sensor networks. Our wireless sensing systems are ideal for test and measurement, remote monitoring, system performance analysis, and embedded applications.

The G-Link-200-OEM has an on-board triaxial accelerometer that allows high-resolution data acquisition with extremely low noise and drift. Additionally, derived vibration parameters allow for long-term monitoring of key performance indicators while maximizing battery life.

Users can easily program nodes for continuous, periodic burst, or event-triggered sampling with the SensorConnect software. The optional web-based SensorCloud interface optimizes data aggregation, analysis, presentation, and alerts for sensor data from remote networks.

 

Product Highlights

  • On-board triaxial accelerometer with ±2 to ±40 g  measurement range
  • Continuous, periodic burst, and event-triggered sampling
  • Output raw acceleration waveform data or derived vibration parameters (Velocity, Amplitude, Crest Factor)
  • 1 Sample per hour to 4096 Samples per second
  • Wide input voltage from 3.3 to 36 V
Datasheet Manual
Where to Buy?
U.S. International OEM

The G-Link-200 has an on-board triaxial accelerometer that allows high-resolution data acquisition with extremely low noise and drift. Additionally, derived vibration parameters allow for long- term monitoring of key performance indicators while maximizing battery life.

Product Highlights

  • On-board triaxial accelerometer with ±2 to 8g* and ±10 to 40g** measurement ranges
  • Continuous, periodic burst, and event-triggered sampling
  • Output raw acceleration waveform data or derived vibration parameters (Velocity, Amplitude, Crest Factor)
  • LXRS protocol allows lossless data collection, scalable networks, and node synchronization of ±50 µs.
  • 1 Sample per hour to 4096 Samples per second
  • Ruggedized IP-67 rated enclosure

*G-Link-200-8G

**G-Link-200-40G

 

 

Datasheet Manual Software
Where to Buy?
U.S. International OEM

  • List Price: $495.00
    List Price: $549.00

Best in Class Performance

  • Full accuracy over the entire operational temperature range of -40° C to 85° C
  • High performance 6-DOF MEMs sensor suite provides best possible accuracy regardless of mounting angle
  • Auto-Adaptive EKF provides best dynamic accuracy
  • LORD Sensing mechanical isolation technology used internally for high shock resistance and reliability.
  • Based on LORD Sensing's proven 5th generation industrial/aerospace solid-state MEMS accelerometer and gyro inertial sensor technology

Ease of Use

  • Compact and rugged reinforced PBT housing is fully sealed for immersion, pressure wash (IP67, IP69K)
  • Low-cost, rugged, reliable AMPSEAL 16 connector
  • Optional metal guard plate protects sensor and connector - permits connector insertion/removal
  • Low-cost, compact size, and full 360° measurement range about all axis permits single part number inventory for a variety of vehicle sizes and applications
  • CAN J1939 communication

Cost Effective

  • Standard or custom configurations
  • Out-of-the-box solution reduces development time

High Performance

  • Extremely low noise on all axis 25 µg/√Hz or 80 µg/√Hz
  • High accuracy temperature sensor ±0.25 °C
  • Wireless range up to 2 km (800 m typical)
  • Datalog up to 8 million data points

Ease of Use

  • End-to-End wireless sensing solution reduces development and deployment time
  • Remote configuration, acquisition, and display of sensor data with SensorConnect™
  • Optional web-based SensorCloud  platform optimizes data storage, viewing, alerts, and analysis.
  • Easy custom integration with open-source, comprehensive communications and command library (API)

High Performance

  • User-configurable low and high pass filters
  • Extremely low noise on all axis 25 µg/√Hz* or 80 µg/√Hz **
  • High accuracy temperature sensor ±0.1 °C
  • Wireless range up to 2 km (800 m typical)
  • Datalog up to 8 million data points
  • *G-Link-200-8G

    **G-Link-200-40G

Ease of Use

  • End-to-End wireless sensing solution reduces development and deployment time
  • Remote configuration, acquisition, and display of sensor data with SensorConnect
  • Optional web-based SensorCloud platform optimizes data storage, viewing, alerts, and analysis.
  • Easy custom integration with open-source, comprehensive communications and command library (API)

Specifications

General
Integrated sensors Triaxial accelerometer, triaxial gyroscope,
temperature sensors
Data outputs TBD (J1939 PGN codes)
Inertial Measurement Unit (IMU) Sensor Outputs
  Accelerometer Gyroscope
Measurement range ±20 g ±1000° /sec
Non-linearity ±0.04% fs ±0.06% fs
Resolution 0.05 mg <0.003° /sec
(500 dps)
Bias instability ±0.04 mg 8° /hr
Initial bias error ±0.004 g ±0.1° /sec
Scale factor stability ±0.05% ±0.05%
Noise density 100 µg/√ Hz 0.0075° /sec/√Hz (300° /sec)
Alignment error ±0.05% ±0.05%
Bandwidth 40 Hz 40 Hz
Offset error over
temperature
0.2% (typ) 0.02% (typ)
Gain error over
temperature
0.05% (typ) 0.06% (typ)
Scale factor non-
linearity (@ 25° C)
0.04% (typ)
0.2% (max)
0.04% (typ)
0.15% (max)
IMU data output rate 100 Hz default (1 Hz to 500 Hz selectable)
Inclinometer Outputs
Attitude accuracy ±0.2° RMS roll and pitch
Attitude heading range 360° about all axes
Attitude resolution 0.05°
Attitude repeatability 0.2°
Calculation update rate 500 Hz
Data output rate 100 Hz default (1 Hz to 500 Hz selectable)
Operating Parameters
Communication CAN 250 kb/s, J1939
Power source +7 V Min, 14/28 V Nominal, +36 V Max
Power consumption 350 mW (typ)
Operating temperature -40 °C to +85 °C
Mechanical shock limit TBD
Physical Specifications
Dimensions L 80 mm x W 55 mm x H 24 mm
Weight 120 grams
Enclosure material PBT Thermoplastic, Reinforced
Ingress protection IP67, IP69K
Mounting 3 x M8, installation torque 20 Nm ±2 Nm
Regulatory compliance ROHS, REACH, CE
Integration
Connectors AMPSEAL 16 gold plated 4 pin
Software MIP® Monitor, Windows XP/Vista/7/8/10 compatible
Accelerometer Channels
  Measurement range g 40 g
±2 g, ±4 g, or ±8 g
configurable
±10 g, ±20 g, or ±40 g
configurable
Noise density 25 μg/√ Hz 80 μg/√ Hz

g offset

±25 mg (±2 g) ±50 mg (±10 g)
g offset vs temperature ±.1 mg/ °C (typical), ±.15 mg/ °C (maximum) ±0.5 mg/ °C (typical), ±0.75 mg/ °C (maximum)
Integrated sensors Triaxial MEMS accelerometer, 3 channels
Accelerometer bandwidth DC to 1 kHz
Resolution 20-bit
Scale factor error < 1% full-scale
Cross axis sensitivity 1%
Sensitivity change (temperature) ±0.01%/° C
Anti-aliasing filter 1.5 kHz (-6 dB attenuation)
Low-pass digital filter 26 to 800 Hz - configurable
High-pass digital filter Off to 2.5 Hz - configurable
Integrated Temperature Channel
Measurement range - 40 °C to 85 °C
Accuracy ±0.25 °C (over full range)
Sampling
Sampling modes Continuous, periodic burst, event triggered
Output options Acceleration, Derived channels: Velocity (IPSrms), Amplitude (Grms and Gpk-pk ) and Crest Factor
Sampling rates 1 sample/hour to 4096 samples/second
Sample rate stability ±5 ppm
Network capacity Up to 128 nodes per RF channel (bandwidth calculator:) http://www.microstrain.com/configure-your-system
Node synchronization ±50 μsec
Data storage capacity 16 M Bytes (up to 8,000,000 data points)
Operating Parameters
Wireless communication range Outdoor/line-of-sight: 2 km (ideal)*, 800 m (typical)** 
Onboard antenna: 1 km (ideal)*, 400 (typical)**   
Indoor/obstructions: 50 m (typical)**
Antenna Surface mount or External through MMCX or U.FL connector
Radio frequency )RF)
transceiver carrier
License-free 2.405 to 2.480 GHz with 16 channels
RF transmit power User-adjustable 0 dBm to 20 dBm. Restricted regionally
Power source 3.3 - 36 V dc to solder pads
ESD ±4000 V (Applies to VIN, GND, Antenna, and shield)
Operating temperature -40 °C to +85 °C
Physical Specifications
Dimensions 38.1 mm x 29.0 mm x 6.5 mm
Mounting (4) 2- 56 UNC
Weight 8.17 grams
Conformal coating Humiseal 1B31
Integration
Compatible gateways All WSDA® gateways
Software SensorCloud, SensorConnect, Windows 7, 8 & 10 compatible
Software development kit http://www.microstrain.com/software/mscl
Regulatory compliance FCC (USA), IC (Canada), CE (European Union), JET (Japan)
 

 

*Actual range varies with conditions

 

**Measured with antennas elevated, no obstructions, no RF interferers.

Accelerometer Channels

Measurement range 8 g 40 g
± 2 g, ± 4 g, or ± 8 g
configurable
±10 g, ±20 g, or  ±40 g

configurable
Noise density 25 µg/√ Hz 80 µg/√ Hz
0 g offset ±25 mg (±2 g) ±50 mg (±10 g)
0 g offset vs temperature ±.1 mg/ °C (typical),
±.15 mg/ °C (maximum)
±0.5 mg/ °C (typical),
±0.75 mg/ °C (maximum)
Integrated Sensors Triaxial MEMS accelerometer, 3 channels
Accelerometer bandwidth DC to 1 kHz
Resolution 20-bit
Scale factor error < 1% full-scale
Cross axis sensitivity 1%

Sensitivity change (temperature)

±0.01%/° C
Anti-aliasing filter 1.5 kHz (-6 dB attenuation)
Low-pass digital filter 26 to 800 Hz - configurable
High-pass digital filter Off to 2.5 Hz - configurable
Integrated Temperature Channel
Measurement range - 40 °C to 85 °C
Accuracy ±0.1 °C (over full range)
Sampling
Sampling modes Continuous, periodic burst, event triggered
Output options

Acceleration, Derived channels: Velocity (IPSrms), Amplitude (Grms and Gpk-pk ) and Crest Factor

Sampling rates 1 sample/hour to 4096 samples/second
Sample rate stability ±5 ppm
Network capacity Up to 128 nodes per RF channel (bandwidth calculator:)
http://www.microstrain.com/configure-your-system
Node synchronization ±50 µsec
Data storage capacity 16 M Bytes (up to 8,000,000 data points)
Operating Parameters
Wireless communication range Outdoor/line-of-sight: 2 km (ideal)*, 800 m (typical)**, Indoor/obstructions: 50 m (typical)**
Radio frequency (RF)
transceiver carrier
License-free 2.405 to 2.480 GHz with 16 channels
RF transmit power

User-adjustable from 0 dBm to 20 dBm. Power output restricted regionally to operate within legal limits

Power source 3 x 3.6 V, ½  AA batteries (Saft LS 14250 recommended)
Battery input range 0.8 V to 5.5 V
Operating temperature -40 °C to +85 °C
Physical Specifications
Dimensions 46.6 mm x 43 mm x 44 mm
Mounting ¼ - 28 UNF - 2B 4.8 mm [.19 in] DP.
Weight Node with 3 batteries: 122 grams
Environmental rating IP67
Enclosure material 300 series stainless steel with polycarbonate cover
Integration
Compatible gateways All WSDA base stations and gateways
Software SensorCloud, SensorConnect, Windows 7, 8 & 10 compatible
Software development kit (SDK)
http://www.microstrain.com/software/mscl
Regulatory compliance FCC (USA), IC (Canada), CE (European Union), JET (Japan)

General Documentation

Software:

Mechanical Drawing

Firmware

Mechanical Drawing

Firmware

Please fill out the following form.
If you would like to speak to someone directly call 802-862-6629.